Product Overview; Installing The Equipment - Huawei FusionCol8000-C210 Quick Manual

1

Product Overview

Product Model
FusionCol8000-C210
2
Engineering Materials
Materials
Cord end terminal (10 mm
Delivered with
terminal (10 mm
the Equipment
assembly (M12x45), and four M6x16 bolts
Drainpipe
Water inlet/outlet pipe
Water inlet pipe for the
wet film humidifier
Cables
Engineering
Purchasing
Others
3

Installing the Equipment

1. Read the related user manual or instructions before installing the FusionCol8000-C.
2. The unit in this document is a fully configured FusionCol8000-C. If some components are not
configured, skip the corresponding steps.
3. You are recommended to use tools that are fully insulated when installing devices.
4. Only engineers from the manufacturer or engineers certified by the agent are allowed to
install, commission, and maintain smart cooling products. Otherwise, personal injuries and
device damage may be caused, which is beyond the warranty range.
Pipe Routing
Routed from top
2 ) for the indoor unit power cable, cable tie, hexagon bolt
G 1/2 inch outer screw thread
DN50 seamless steel pipe with a G 2 inch external
threaded connector
G 1/2 inch outer screw thread
Active power cable (4 x 10 mm
cable (4 x 10 mm
monitoring cables, and equipotential cable (6 mm
outdoor copper cable)
Hoop iron, pipe support, thermal insulation foam,
dedicated glue for thermal insulation foam, and
thread sealant
Cable Routing
Routed from top
) for the indoor unit power cable, OT ground
2
2 ), teamwork networking and
Copyright © Huawei Technologies Co., Ltd. 2022.
1
Dimensions Without Packing (H
x W x D) (mm)
2450 x 2350 x 1100
2 ), standby power
All rights reserved.
2