Toshiba Bi-CMOS Linear Integrated Circuit Silicon Monolithic
TB9051FTG
PWM type single channel H-Bridge DC brushed motor driver for automotive use
1. Outline
This product is a motor driver IC which incorporates the output driver
for the direct drive of a DC brushed motor intended for the automotive
use.
The motor drive output can be highly efficient operation by the PWM
control which realizes low-on resistance.
Forward / Reverse / brake mode can be selected according to PWM1 signal and PWM2 signal, and the
motor operation mode and stop mode can be selected by ENABLE pin.
Moreover, the output current capacity is 5A (max), it is suitable for various automotive applications
such as a throttle and valve control, various engine bulbs, storing of door mirrors, and a seat
positioning.
2. Application
Automotive applications such as a throttle and valve control, various engine bulbs, and storing of door
mirrors
3. Feature
Motor driver block:
●
Abnormality detection function:
●
Built-in initial diagnosis function: Power supply abnormality detection circuit (VBAT
●
Output type:
●
Motor operation:
●
Current limitation control:
●
Output high-side current monitoring function (OCM pin)
●
DIAG output
●
Built-in the through current prevention circuit
●
Operating voltage range:
●
Operating temperature range:
●
Compact type flat package:
●
AEC-Q100 Qualified
●
・If the label of shipping box is indicated to be "[[G]]/RoHS COMPATIBLE2", "[[G]]/RoHS [[Chemical
symbol(s) of controlled substance(s)", and "RoHS COMPATIBLE" or "RoHS COMPATIBLE, [[Chemical
symbol(s) of controlled substance(s)]]>MCV", this product is compliant with the EU RoHS Directive
(2011 / 65 / EU) in the meaning of the statement.
©2016-2019
Toshiba Electronic Devices & Storage Corporation
Single channel H-Bridge driver
(Ron(Pch+Nch))<0.45 Ω (Max @Tj = 150°C, VBAT = 8 V)
Over-current detection, over-temperature detection, VBAT
undervoltage detection, VCC undervoltage detection, and
VCC high voltage detection
undervoltage, VCC undervoltage and VCC high voltage.)
PWM control output
Forward /Reverse/ Brake
Current limiter with chopper type
VBAT = 4.5 to 28 V (Maximum ratings of power supply
voltage 40V (max): 0.5 sec.)
Ta = -40°C to 125°C
P-QFN28-0606-0.65-001
1 / 49
TB9051FTG
P-QFN28-0606-0.65-001
Ver.1.1 2019-03-14