Related Manuals for LG UM5J-B
Summary of Contents for LG UM5J-B
- Page 1 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 49VL5B www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS MAKING CONNECTIONS IMPORTANT PRECAUTIONS Connecting to a PC Electrical Power Related Precautions External Device Connection Precautions in installing the Product Daisy Chain Monitors Precautions in Moving the Product - DVI-D Cable Precautions in Using/Cleaning the Product TROUBLESHOOTING On Disposal (Only, Hg lamp used LCD Monitor) PRODUCT SPECIFICATIONS... -
Page 3: Important Precautions
Important • If you don’t intend to use the product for a long time, unplug the power cable from the product. Precautions ► Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. •... -
Page 4: Precautions In Installing The Product
When lifting or moving the product, do not hold strange sound from the product unplug the it upside down while holding only the stand. power cord and contact LG Customer Service. ► This may cause the product to fall resulting in ►... -
Page 5: Precautions In Using/Cleaning The Product
► Fire or electric shock can occur. • Disposal of this product must be carried out ► Contact LG Customer Service for repair. in accordance to the regulations of your local • When cleaning the product, unplug the power authority. -
Page 6: Licenses
LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 7: Assembly And Preparation
Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. • SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for your model. -
Page 8: Parts
Parts Connection panel To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). -
Page 9: Storage Method For Panel Protection
STORAGE METHOD FOR PANEL PROTECTION Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both If the product is tilted onto the bezel, the bottom sides of the product, and tilt backward carefully for. of the panel may be damaged. -
Page 10: Installing On A Wall
If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an 100 mm authorized LG wall mount and contact your local (3.9 inches) 200 mm dealer or qualified personnel to assist with the (7.8 inches) - Page 11 Insert and tighten the eyebolts, or brackets and Securing the monitor to a wall (optional) bolts on the back of the monitor. (Procedure may differ depending on the model.) - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. Mount the wall brackets with the bolts to the wall.
-
Page 12: Ir Receiver Connection
IR Receiver Connection IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Tiling Displays How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. -
Page 13: How To Join Sets
How to Join Sets Join other sets using screws for fixing the VESA wall mount in the same way as above. Set 4 joined to the rest of the sets (2 x 2 tiling) After joining the sets, use the tiling guide to adjust the gap between the sets. (M4 x L8) 54 mm (2.1 inches) 39 mm... -
Page 14: Remote Control
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. - Page 15 Selects the Picture Mode. INFO Views the information of the currently program and the screen. W.BAL Enters the White Balance menu. SETTINGS Accesses the main menus or saves your input and exit menus. S.MENU SuperSign menu key (This model does not support this.) Navigation Buttons Scrolls through menus or options.
-
Page 16: Assigning Input Port Labels
Assigning Input Port Labels Display which devices are connected to which external input ports. Access the Input list screen and press the red (input label) button on the remote control. You can assign an input label for every input except USB. NOTE •... - Page 17 NOTE • Using an HDMI connection will provide the best image quality. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI-D/HDMI cable. • If you turn the monitor set on when the set becomes cold, the screen may flicker. This is normal. •...
-
Page 18: Daisy Chain Monitors
/COMPONENT OUT /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT Daisy Chain Monitors /COMPONENT IN /COMPONENT IN /COMPONENT IN /COMPONENT IN Use this function when displaying DVI-D inputs of a PC in other products. To use different products connected to each other Connect one end of the signal input cable (DVI-D Cable) to the DVI-D OUT connector of product 1 and connect the other end to the DVI-D IN connector of other products. -
Page 19: Troubleshooting
TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected? See if the power cord is properly connected to the outlet. Power is on, but the screen appears Adjust brightness and contrast again. extremely dark. Backlight may need repair. Does the Invalid Format message The signal from the PC (graphics card) is out of the vertical or appear? - Page 20 The screen image looks abnormal. Problem Resolution Is the screen position wrong? D-Sub analog signal - Press the AUTO button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, select [PICTURE] - [Screen] - [Position] in OSD menu.
- Page 21 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once every 12 hours at the very minimum;...
-
Page 22: Product Specifications
PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Pixel pitch 0.55926 mm (H) x 0.55926 mm (V) - Page 23 Component Support Mode RGB (PC) Support mode Horizontal Vertical Horizontal Vertical Resolution Resolution frequency (kHz) frequency (Hz) frequency (kHz) frequency (Hz) 720 x 480 15.63 59.94 640 x 480 31.469 59.94 720 x 483 31.47 59.94 720 x 400 31.468 70.8 720 x 576 15.625...
- Page 24 Make sure to read the Safety Precautions before using the product. ENERGY STAR® is a set of power-saving guidelines issued The model and serial numbers of the SET are by the U.S.Environmental Protection Agency (EPA). located on the back and one side of the SET. As an ENERGY STAR®...