Fm Display Information; Bluetooth Mode - Sharp DR-430 User Manual

8

FM display information

When listening to an FM station you can change
the information that appears on the second line
of the display. Repeatedly short press
through the different information options:
• Radiotext (RT) - This is scrolling text information
as supplied by the broadcaster. This could
include artist names, song titles, contact details
for the radio station, etc.
• Program Type (PTY) – e.g., 'Rock' , 'Pop' , 'Talk' ,
or 'News'
• Station name or frequency – e.g., BBC R4,
93.30MHz
• Time
• Date

Bluetooth mode

Ensure your radio is in Bluetooth mode by
short pressing
<Bluetooth>. Your radio will begin to search for
Bluetooth devices. Ensure the Bluetooth-enabled
device you are connecting to is discoverable.
Note: If necessary, refer to the instructions for
your device to add or set up Bluetooth.
When found, your radio will be displayed as
'SHARP DR-430' on your device. Select this to
begin pairing. Once done, <BT connected> will
be displayed on your radio.
Paired devices will connect to the radio when they
are within range (within 10 metres in line of sight).
Your device will remain paired with the radio
unless you decide to disconnect it.
To disconnect from Bluetooth, long press
for 3 seconds to unpair your current device and
search for new devices.
Wirelessly stream music via
Bluetooth
In Bluetooth mode, you can wirelessly stream
audio through the product's speaker. Use the
controls on your paired Bluetooth device as well
as those on your radio. Controls available:
• Play/ Pause: Short press
• Previous track: Short press
• Next track: Short press
to cycle
until the radio displays
Volume can also be adjusted – either using your
radio and/or your connected device.
Note: If the radio is inactive for 20 minutes, or
no audio signal is being received, the radio will
automatically go into standby.