Making Ice Cubes; Ice Cube Maker With Integrated Ice Cube Tray - Miele FNS 37492 iE Operating And Installation Instructions

For the automatic ice maker to oper-
ate, it must be connected to a water
supply (see "Water supply").

Danger to health!
Rinse out the ice maker and water
supply line:
– before using for the first time,
– if the ice maker has not been used
for a long time,
– regularly when in continuous use
(at least once a month) to remove
residual ice from the system (to avoid
blocking the water supply line) and
– before switching the ice maker off
for a long time. See "Cleaning and
care – Rinsing the ice maker" for de-
tails of how to enable this function.
Ice cube maker with integrated
ice cube tray
Only make normal domestic quantities
of ice cubes with the ice cube maker.
After the initial commissioning of the
machine, it can take up to 24 hours for
the first ice cubes to drop out of the
ice cube maker and collect in the
drawer.
After the ice cube maker has been
turned off and on again, it can take up
to 6 hours for this process to be com-
pleted.

Making ice cubes

The ice cube drawer  contains an au-
tomatic ice cube maker .
When the ice cube maker is switched
on, the indicator light on it lights up.
Ice cubes can only be made when the
ice cube drawer is completely closed.
An ice cube tray  where ice cubes are
produced is integrated into the ice cube
maker .
The ice cube tray automatically empties
into the drawer as soon as the ice
cubes are ready. The ice cube maker
automatically stops making ice cubes
when the ice cube drawer is full. The
drawer will not fill up to the top edge.
37