Advertisement
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG's option, if it proves to be defective in material or work-
manship, under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date
of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the
product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to return
the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion of
Shipping both ways will be paid by LG during the Warranty
the original warranty period.
Period. After the Warranty Period, you pay inbound ship-
ping charges and LG pays return shipping charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY
IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL
NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROF-
ITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR
OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an
implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you
may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environ-
mental specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightning
strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or voltage,
reception problem caused by inadequate home antenna or faulty antenna connections, computer software, insti-
tutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Call 1-800-243-0000 (24 hours a day, 365 days per year)
Product Assistance, or Customer Assistance
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
Setting a channel or ID of Wireless
transmitter and Wireless Receiver
Note:
If there is a strong electromagnetic wave product
nearby, interference may occur. Put the unit (Wireless
Receiver and main unit) away from there.
(Ex: Micro wave oven)
wireless transmitter
LED indicator
Displays the operating
status.
LED indicator of wireless transmitter
* LED indicator - "BLUE"
The main set is turned on, everything is connected and
transmitting.
* LED indicator - "RED"
The wireless transmitter is in standby mode.
* LED indicator - "OFF (No display)"
The adaptor is disconnected to the outlet.
DC IN connector
ID (ID.)
button
SOUND SIGNAL
connector
SIGNAL
ID./CH.
DC IN
Wireless Receiver
LED indicator
Displays the operated
status.
LED indicator of Wireless Receiver
* LED indicator - "BLUE"
The Wireless Receiver is receiving a signal of wireless
transmitter.
* LED indicator - "RED"
The Wireless Receiver is in standby mode.
P/N : MFL36250138
Issue O
Printed in China
Rear speaker connector
Power cord
Setting an ID of Wireless Transmitter
Connection
When the unit is manufactured, the ID is already set.
Connect the speakers to the front (right, left) or center
If an interference occurs or you use a new Wireless RX, an
speaker connectors at the main set.
ID is set again.
Connect the subwoofer to the woofer connector.
1. Connect the SOUND SIGNAL connector of transmitter and
Connect the power cord of the Wireless Receiver to the
the rear (right, left) speaker terminals of main unit with the
outlet, then connect the Wireless Receiver and the rear
SOUND SIGNAL cable.
speaker (right, left) with the speaker cable.
Connect the adaptor (DC 7V) to the outlet and transmitter.
2. Connect the adaptor (DC 7V) to the outlet and transmitter.
Connect the SOUND SIGNAL connector of the Wireless
3. Disconnect power cord of Wireless Receiver.
Transmitter and rear (right, left) speaker of connectors of
4. Press the ID. button for more than about 3 seconds.
the main set with the sound signal cable.
The blue LED indicator
.
will quickly flicker
Set the distance between this unit and Wireless Receiver
within 10m.
5. Connect power cord of Wireless Receiver.
Note:
If there is no audio signal for longer than 10 minutes, the
Wireless Receiver and Wireless Transmitter will be automati-
cally switched to standby mode. At power saving mode, both
LEDs will turn red. LEDs will turn blue when there is any
audio signal back.
If you operate main unit then wireless speakers (rear speak-
ers) sound within a few seconds in standby mode.
Be sure to connect the ground cable rear
panel of the unit by using the screw in rear
panel. If this is not connected, the trans-
mitter will not function.
Notes:
Optimum performance can be implemented only when the
Wireless Transmitter and the Wireless Receiver within distance of
2m to 10m is used since communication failure may occur if
longer distance is used.
Be sure to match the speaker cable to the appropriate terminal on
the components: + to + and – to –. If the cables are reversed, the
sound will be distorted and will lack base.
It takes a few seconds (and may take longer) for the Wireless
Transmitter and Wireless Receiver to communicate with each other.
When the unit is turned off, the Wireless Transmitter is in standby
mode (off) automatically after about 10 minutes.
If the Wireless Transmitter is turned off, the Wireless Receiver will
not function.
Center
Front speaker
Front speaker
speaker
(Right)
(Left)
Wireless TX
SIGNAL
ID./CH.
DC IN
Sound signal
Red
cable
Black
Ground cable
Subwoofer
Wireless RX
Rear speaker
Rear speaker
(Right)
(Left)
Hide quick links:
Advertisement
