Panasonic WM-KG645 Operating Instructions

Operating Instructions
Gooseneck Microphone
WM-KG645
Model No.
Before attempting to connect or operate this product, please read
these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this
manual.
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
https://na.panasonic.com/us/
© Panasonic Connect Co., Ltd. 2022
PUQW1046YA
Printed in China
Preface
This product is a microphone that is used connected with the
WX-ST600P wireless transmitter (sold separately) in a 1.9 GHz
digital wireless microphone system.
Standard accessories
Windscreen...................................................................................1
Operating Instructions (this booklet) .............................................1
Warranty Card. .............................................................................1
Disclaimer of Warranty
IN NO EVENT SHALL Panasonic Connect Co., Ltd. BE LIABLE TO
ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR
REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE
CASES, INCLUDING BUT NOT LIMITED TO BELOW:
A ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION,
DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE
PRODUCT;
B ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE
USER;
C ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED
DISASSEMBLY, REPAIR OR MODIFICATION OF THE PRODUCT
BY THE USER, REGARDLESS OF THE CAUSE OF THE
MALFUNCTION OR TROUBLE;
D ANY PROBLEM CAUSING FAILED SIGNAL TRANSMISSION
RESULTING IN CONSEQUENTIAL INCONVENIENCE, LOSS OR
DAMAGE, ARISING OUT OF CAUSES SUCH AS SYSTEM
MALFUNCTION, FAULT, SET UP OR INSTALLATION.
E ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS
OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY
THE DEVICES OF THIRD PARTY.
F ANY INCONVENIENCE, LOSS, OR DAMAGE RESULTING FROM
AN ACCIDENT CAUSED BY AN INADEQUATE INSTALLATION
METHOD OR ANY FACTORS OTHER THAN A DEFECT IN THE
PRODUCT ITSELF.
Fcg0722-0
Precautions
If the product shows any abnormality, immediately stop
using it
If the product shows abnormalities such as smoke or an unusual
smell, continuing to use it may pose a fire hazard.
Do not attempt to disassemble or remodel the product
It may lead to fire or electric shock.
Do not spill any liquid
It may lead to fire or electric shock.
● Immediately turn the product OFF and contact the retailer.
Do not perform maintenance while the product is powered
ON
It may lead to injury.
Refer to a professional for disposal
Burning the product may lead to harmful chemicals causing damage
to the eyes, and it could pose a fire hazard or burn risk.
Do not install at places exposed to large amount of
humidity and/or dust
It may lead to injury.
Do not install the product where children may reach it
It may lead to injury.
Usage precautions
This product is intended for indoor use only.
It cannot be used outdoors.
Avoid exposing the product to direct sunlight for extended periods of
time, and do not install it near air conditioners or heaters. Failing to do
so may lead to damage to the shape and color of the product, and
may cause it to malfunction. Also avoid exposure to water droplets
and bubbles.
● This product is designed specifically for use with the WX-ST600P
wireless transmitter (sold separately). Do not use it with any other
device.
● Do not leave the product in hot places such as near heat-diffusing
appliances (power amplifiers, video monitors, measuring
instruments, etc.) or closed-off cars in the summer. When storing
the product, keep it away from moisture as much as possible.
● Subjecting the product to strong impacts, drops, etc. may alter its
fine-tuning and change its characteristics. Please use it with care.
Take care not to subject this product to an impact because doing so
while sound is amplified will cause a large impact noise to be
generated.
● This product does not have a drip-proof structure. Do not use it with
wet hands or where water will get directly on it.
● Do not disassemble the product or touch its inner components.
● Do not use the product where there is a risk of damage from
seawater or corrosive gases.
● Be sure to use this product with a windscreen attached. Moisture
(saliva or condensation) entering the microphone head may cause
sound to not be output.
Maintenance
● Turn OFF the power of WX-ST600P and clean the product with a
dry cloth.
● Do not use volatile chemicals such as benzine or paint thinner.
● When using chemically treated cloths, carefully read the included
instructions.
● If the surface of the product is particularly dirty, dilute mild detergent
with water, then soak a soft cloth with it. Squeeze the cloth to
remove excess moisture and use it to clean the product. After
having cleaned the product, use a soft dry cloth to remove any
residues of the detergent.
Parts and their names
Microphone
Flexible shaft
Windscreen
(included)
(Rear)
Low cut switch
OFF
ON
Output connector
3-pin XLR-M type