Table Of Contents - Toro Sand Pro 3040 Operator's Manual

The bunker pump is mounted to a Sand Pro machine
and is intended to be used by professional, hired
operators in commercial applications. It is primarily
designed to pump water out of sand traps.
This product complies with all relevant European
directives. For details, please see the Declaration of
Incorporation (DOI) at the back of this publication.
WARNING
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
© 2022-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
www.Toro.com
Figure 1
2
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
Before Operating ................................................ 3
While Operating.................................................. 3
Maintenance....................................................... 4
Safety and Instructional Decals .......................... 5
Setup ........................................................................ 6
1 Mounting the Bunker Pump to the Traction
Unit ................................................................. 6
2 Adjusting the Link Assembly ............................ 7
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
g008126
g000502