Lenovo 3000 N100 0689 Supplementary Manual page 41

9. Pivot the SO-DIMM downward until it snaps into place.
10. Make sure that the card is firmly fixed in the slot and does not move
easily.
11. Align the front side of the memory slot cover 1 , reinstall the cover 2 ,
and tighten the screws 3 .
Attention: When you have added or upgraded an SO-DIMM, do not
use your computer until you have closed the memory slot cover. Never
use the computer with the cover open.
12. Reinstall the battery.
13. Turn the computer over again, and reconnect the ac adapter and cables to
the computer.
To make sure that the SO-DIMM is installed correctly, do as follows:
1. Turn the computer on.
2. While the initial screen is displayed, press F1. The BIOS Utility screen
opens. The "Memory" item shows the amount of memory you can utilize.
Chapter 5. Upgrading and replacing devices
Replacing memory
33