NEC 1000BASE-T User Manual page 39

Bracket replacement
Depending on the type of system, installation of this product requires either a standard bracket or a low-profile
bracket. NEC provides both of these brackets with the product. By default low-profile bracket is attached. Please
replace the bracket according to the following steps as necessary.
■N8104-201
１. Remove the screw using a Philips screwdriver.
3. Fasten the screw using
a Philips screwdriver.
２. Remove a bracket from the adapter,
Attache the different bracket.
Note: Keep the bracket was removed.
E-13