Dell P2222H Instructions

1
DELL P2222H
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out pack stand, base and all of the
including QSG,
S2
CD&user's manualand EEI label(optinal) from the
carton.(Note: It depends on whether users returning
the accessories)
base
power cable
Take out of the Paper cushion from the carton, then
S3
take out the packed monitor from the Pizza box and
put it on a cushion.
Take out the monitor from the bag and put it on a
S4
protective cushion.
accessories
DP cable, power cable, USB cable,
stand
QSG
DP cable
USB cable
user's manual
monitor
Use a Philips-head screwdriver to remove four
S5 screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
2
4
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the key
S6
cable and USB FFC cable from the connectors of
the interface board, and then remove the rear cover.
±
0.5kgfxcm)
3
1
.
1
2
3