System Description; Modules; Sensors; Figure 1 - Cbw3 Modules - GE CSE Uniserve CB Watch 3 Operating Manual

SYSTEM DESCRIPTION

Modules

The CBW3 system is comprised of both modules and sensors. The modules include the main
processor module and the various I/O modules. They receive and process the signals
obtained from all the sensors.
For more detailed information, please refer to the CBW3 Installation Manual.
1 Power supply
2 ProWatch Module
3 DI16 Module
4 AI8-1 Module

Sensors

Depending on your CBW3 configuration, various sensors are connected to the modules,
either directly or through terminal blocs. These sensors acquire the data from the circuit
breaker so that it can be received by the corresponding I/O modules and processed in the
main ProWatch module. Please refer to the Installation Manual for details on sensors.
MA-037 - CB Watch 3 Operating Manual
Figure 1 – CBW3 Modules
5 AI8-2 Module
6 AI8-3 Module
7 RTD8 Module
8 DO16 Module
Figure 2 – examples of sensors used
v7.0 - May 2020 Page 10 of 118