Advertisement
Product features
Intended Use: This product is used to provide a short-term heat preservation environment for medical
institutions to transit or temporarily store blood and products, vaccines, reagents, etc.
Structure and composition: This product consists of heat preservation box, cold storage agent, data
recording system (optional) and relevant accessories.
1. Temperature control
• During the heat preservation in the transiting process, the temperature in the box meets the
range of 2 to 10℃.
• The temperature display accuracy in the box is 0.1℃
2. Safety system
• The door body adopts double-locking structure, which prevents it from being opened at will and
ensures the safety of stored articles.
• The box body adopts rotational molding box shell, which is resistant to bumping, suitable for
transportation, and is filled with high-density foaming materials to enhance heat preservation
performance.
3. Refrigeration system
• Passive refrigeration, conduct freezing treatment in advance when putting ice bank into the box;
• Before transportation, in order to reduce the air temperature in the box, the box should be precooled
at 2~6℃ in advance. In case precooling cannot be made, take the sensor out and sandwich it
between precooling loads during transportation to sense the load temperature.
For specific functions, please refer to the equipment you have purchased.
Due to the improvement of the product, the Haier refrigerated transit box you purchased may not be
completely consistent with the illustration in the manual. Hereby apologize. The instructions are
subject to change without prior notice.
4
Product installation
Installation environment
• Ambient temperature: -10℃ to 43℃.
• Avoid large amounts of dust.
• Avoid mechanical shaking or vibration.
• Operating position of transit box: altitude below 2,000m.
Due to the sensitivity of transit box to the ambient temperature, if it is installed in other environments
•
Attention
than the above, the transit box cannot operate normally. Please improve the environment before using.
Due to the sensitivity of transit box to the ambient temperature, if it is installed in other environments
•
than the above, the transit box cannot operate normally. Please improve the environment before using.
Installation site
In order to ensure the normal operation of the transit box and obtain the best performance level, the installation site
should meet the following conditions:
It cannot be installed in a narrow and airtight space. At least the normal entry and exit of products should be ensured,
•
so as to avoid maintenance difficulties caused by machine failure, making the machine unable to repair in time, which
will cause damage to stored products.
The ground at the installation site must be solid and flat.
•
Good ventilation, avoid direct sunlight.
•
Stay away from radiation areas and avoid using radiation sensitive equipment around them
•
Preparation Before Use
1. Remove the packing material and packing tape
Remove all packaging materials and tapes for transportation.
2. Inventory of random accessories
Please check the contents in the box according to that of the packing list. If there is any
discrepancy, please contact the after-sales department in time.
3. Placement conditions
Select the appropriate distance according to the size of the space.
4. Ice bank precooling/box precooling
Take out the integrated ice bank in the transit box and put it into the freezing environment to precool for
4 hours;
Precool the box in advance in a refrigerated environment, or take the sensor out and sandwich in the
middle of loads
5. Observation
After leveling and cleaning the machine body, put in the frozen ice bank to ensure the normal operation
of the transit box.
5
Advertisement
