Table Of Contents; Before Using A New Machine; List Of Contents - Husqvarna 225L Operator's Manual

Before using a new machine

• Read the Operator's Manual carefully.
• Check the assembly and adjustment of the cutting
equipment. See page 13.
• Start the machine and check the carburettor settings.
See page 16-17.
IMPORTANT! A too lean carburettor adjustment significantly
increases the risk of an engine breakdown.
Insufficient care of the air filter will cause deposits on the spark
plug resulting in starting difficulties.
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any nonroad
engine repair establishment or individual.
!
WARNING!
Under no circumstances may the design
of the machine be modified without the
permission of the manufacturer. Always
use genuine accessories. Non-authorised
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty does not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
CONTENTS
SYMBOL EXPLANATION
Symbols ............................................................................... 2
CONTENTS
Before using a new machine ................................................. 3
List of contents .................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ............................................. 4
The machine's safety equipment .......................................... 4
Control, maintenance and service of the machine's safety
equipment ...................................................................... 6
Cutting equipment .............................................................. 7
General safety instructions ................................................... 8
General working instructions ............................................... 9
Basic working techniques ..................................................... 9
WHAT IS WHAT?
What is what on the trimmer? ............................................ 11
ASSEMBLY
Assembling the loop handlebar .......................................... 12
Assembling and dismantling the two-part shaft (225LD) ... 12
Assembling the spray guard and
trimmer head Superauto II ........................................... 13
Assembling other guards and cutting equipment ................ 13
FUEL HANDLING
Fuel mixture ...................................................................... 14
Fuelling.............................................................................. 14
START AND STOP
Control before starting ....................................................... 15
Start and stop ..................................................................... 15
MAINTENANCE
Carburettor ........................................................................ 16
Muffler .............................................................................. 18
Cooling system .................................................................. 18
Air filter ............................................................................. 18
Spark plug .......................................................................... 19
Angle gear .......................................................................... 19
Two-part shaft .................................................................... 19
Maintenance schedule ........................................................ 20
TECHNICAL DATA
225L/LD ........................................................................... 21
225L Lite ........................................................................... 21
232L .................................................................................. 21
FEDERAL AND CALIFORNIA EMISSION CONTROL
WARRANTY STATEMENT
Your warranty rights and obligations .................................. 22

List of contents

3
English -