Chapter 45: Removing The Display Cable; Prerequisites; Procedure - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the display assembly.
4. Follow the procedure from step 1 to step 3 in
5. Remove the camera.
Procedure
1. Peel off the tape and open the latch to disconnect the display cable from the display panel.
2. Peel off the sensor-board cable tape and disconnect the sensor-board cable.
3. Open the connector latch and disconnect the display cable.
4. Note the display cable routing and remove the display cable from the routing guides on the display panel.
5. Lift the display cable off the display panel.
Removing the display cable
computer. After working inside your computer, follow the instructions in
"Removing the display panel".
Removing the display cable
45
After
www.dell.com/
77