Sony DPF-D95 Service Manual page 6

– ENGLISH –
Set the destination when the MAIN PWB ASSY SERVICE was replaced.
2-1. HOW TO CHANGE THE DESTINATION
Procedure
1. Plug the AC adapter attached to the set into the DC IN 5V terminal
on the rear panel of the set and insert the power cord into the socket.
Press the 1 (on/standby) button to turn off the power once.
(The power switch LED on the set changes from green to red.)
2. With the [VIEW MODE] button and [MENU] button pressed, turn
on the 1 (on/standby) button, and when the default setting
screen (Fig. 2-1-1) appears, release the [VIEW MODE] button and
[MENU] button.
Factory
RTC Test
Setting
Check Sum: XXXXXXXX
Software Ver. X. XX. X. XX
Model: D95
Destination:
J1 U2 CA2 CEK
CED CEP CEU E37
E33 E32 AU3 JE3
KR2 CN9 TW6 HK4
AR2 BR4 E35
Restore all Setting Format Internal Memory
Fig. 2-1-1
3. Check that the model name displayed on the side of "Model"
name meets the following:
D95: DPF-D95
Note: Using [B] [b] buttons, move a yellow frame to the model
name to be set.
4. Red characters of "Destination" show default setting of this set.
(Fig. 2-1-1 shows that the destination has been set to U2)
Using [V] [v] [b] [B] buttons, move a yellow frame to the
destination to be set. (Fig. 2-1-1 shows that J1 has been selected as
destination.)
5. Press the [ENTER] button, and the characters will change to red,
indicating that the selected destination was set. (Fig. 2-1-2)
Factory
RTC Test
Setting
Software Ver. X. XX. X. XX Check Sum: XXXXXXXX
Model: D95
Destination:
J1 U2 CA2 CEK
CED CEP CEU E37
E33 E32 AU3 JE3
KR2 CN9 TW6 HK4
AR2 BR4 E35
Restore all Setting Format Internal Memory
Fig. 2-1-2
DPF-D95
6. With a yellow frame moved to "Restore all setting", press the
[ENTER] button. (Fig. 2-1-3)
Factory
RTC Test
Setting
Software Ver. X. XX. X. XX Check Sum: XXXXXXXX
Model: D95
Destination:
J1 U2 CA2 CEK
CED CEP CEU E37
E33 E32 AU3 JE3
KR2 CN9 TW6 HK4
AR2 BR4 E35
Format Internal Memory
Restore all Setting
Fig. 2-1-3
7. The screen becomes yellow and the setting is complete.
Fig. 2-1-4
8. With yellow screen displayed, unplug the AC adapter from the DC IN
5V terminal.
9. Plug the AC adapter into the DC IN 5V terminal and turn on the
power.
10. Press the [MENU] button to display the Settings menu, and select
"Initialize" to execute. (Fig. 2-1-5)
Settings
Slideshow Settings
Auto Power ON/OFF
MENU
Date/time Settings
General Settings
System Information
ENTER
Language Setting
A
Initialize
BACK
/ ENTER Select BACK End
Fig. 2-1-5
11. Select "Reset" of "Initialize" to execute. (Fig. 2-1-6)
Initialize
Format internal memory
Initialize settings
/ ENTER Select BACK Return
Fig. 2-1- 6
12. Select "Yes" to execute, and "Complete" will be displayed,
indicating that all the default settings have completed.
(Fig. 2-1-7)
All settings will be
returned to factory default.
Yes
No
Fig. 2-1- 7
2-2. CONFIRMATION OF DESTINATION
1. Press the [MENU] button to display the menu, and if the language
you selected is set, the setting has completed.
– 6 –
MENU
ENTER
BACK
MENU
ENTER
BACK