Linked Event Operation Examples - Canon VB-H47 Operation Manual

HM4x S32VE
[Volume]
Enter the volume for the sound clip.

Linked Event Operation Examples

This shows linked event status examples according to the ON/OFF combinations for Event 1 and Event 2.
In the examples below, [Event Gap] is four seconds and each cell in the figures below represents one second.

[Event Linking Method] Set to [OR]
Only One Event ON
Event 1
Event 2
Linked Event
Both Events ON
Event 1
Event 2
Linked Event

[Event Linking Method] is Set to [AND], [Event Order] is Specified
This shows examples when [Event Order] is set to [Event 1 -> 2].
When [Event Order] is set to [None] and [Event Linking Method] is set to [AND], linked events will be as in the
examples, even if Event 1 and Event 2 are switched.
When Events Occur in Order 1 -> 2
Event 1
Event 2
Linked Event
When Events Occur in Order 2 -> 1 -> 2
Event 1
Event 2
Linked Event
Both events are ON, but not in the right order. Therefore, a
linked event does not occur here.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
129
ON
OFF
ON
OFF
ON
OFF