Operating the appliance
en
Adding/removing laundry
After starting the programme (only for
washing), you can add or remove
laundry if necessary.
Touch the Έναρξη/Προσθήκη ρούχων
(Start/Reload) button. The appliance
checks whether reloading is possible.
If the following appears on the display
panel:
The symbol Õ disappears,
■
reloading is possible.
The symbol Õ lights up, reloading is
■
not possible.
To continue the programme, touch the
Έναρξη/Προσθήκη ρούχων (Start/
Reload) button. The programme
continues automatically.
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Touch the Έναρξη/Προσθήκη
1.
ρούχων (Start/Reload) button.
Select another programme.
2.
And touch the Έναρξη/Προσθήκη
3.
ρούχων (Start/Reload) button again.
The new programme starts from the
beginning.
If drying is activated, after
Note:
touching the Έναρξη/Προσθήκη
ρούχων (Start/Reload) button, when
the •©£ is displayed, waiting for the
appliance running to cool down the
laundry till the •©£ disappears, then
select another programme.
40
Cancel the programme
For programmes washing at high
temperatures:
Touch the Έναρξη/Προσθήκη
1.
ρούχων (Start/Reload) button.
To cool down laundry: Select Rinse.
2.
Touch the Έναρξη/Προσθήκη
3.
ρούχων (Start/Reload) button.
For programmes washing at low
temperatures:
Touch the Έναρξη/Προσθήκη
1.
ρούχων (Start/Reload) button.
Select Στύψιμο (Spin)/Άντληση
2.
(Drain).
Touch the Έναρξη/Προσθήκη
3.
ρούχων (Start/Reload) button.
For programmes in drying process:
Touch the Έναρξη/Προσθήκη
1.
ρούχων (Start/Reload) button.
If the •©£ on the display panel,
2.
waiting for the appliance running to
cool down the laundry till the •©£
disappears.
Programme end
"Ÿš lights up on the display and ~ and
Õ displays are off.
If you have selected 2, the water is only
drained after rinse process, no spin
cycle.
Notes
If •©£ flashes in the display before
■
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.