Table of Contents
Advertisement
Use Instructions
Power on and o the machine
Tap and hold the
button for 3 seconds to power on the machine.
Then, the power indicator is on, and the vacuum cleaner enters the
standby state. Tap and hold the
o the machine.
Note: The main unit in the charging state cannot be powered o .
Charging
Auto mode: After cleaning, the main unit automatically returns to
the dock for charging.
Manual mode: In the pause state, press the
"return for charging" mode or use the controller or the smart APP
for charging.
Note: If the main unit fails to find the dock, it will automatically return to the
starting point. In this case, manually put the main unit back to the dock for
charging.
button for 3 seconds to power
button to activate the
Sweeping/Pause
Once the machine powers on, tap the
or use the controller or the smart APP to start sweeping.
Note:
·The machine cannot clean liquid.
·If the power is lower than 15%, the machine cannot work. Therefore, charge the
machine before sweeping.
·If the power is lower than 15% during sweeping, the machine will automatically
return back to the dock for charging.
·Before cleaning, tidy up all kinds of wires on the ground (including the power
cord of the dock). Otherwise, the machine may drag the wires while cleaning,
which may cause power failures of other electric appliance or damage items
or wires.
Virtual wall (optional)
The magnetic strip can be set to separate restricted zones (such as
washing rooms and kitchens).
Note: Fix the magnetic strip to the ground to avoid peeling o ; otherwise
a ecting the result of the visual wall.
EN 10
button on the main unit
Magnetic strip
Advertisement
Table of Contents
