How To Use Your Smart Safe Box; First Use - Philips 1000 Series User Manual

How to use your smart safe box

First use

1. Please use mechanical key for �rst unlocking.
2. Press the 'Power button'. There will be a beep after around 5
seconds, indicating successful unlocking.
3. Open sliding cover. The blue indicator light will be turned on.
Attention
Possible cause of no beep after pressing 'Power button' might be
low battery voltage. Please refer to FQA to solve this issue.
Power button
Registering �nger vein
1. Switch 'Mode button' to left, the safe enters into "Finger vein
registration mode".
2. Entering �nger vein: please stretch your �nger and keep the
distal and proximal part of your �nger close to the detection area.
Repeat no less than 5 times.
Attention：
don't press too hard.
3. After successful registration, switch the 'Mode button' to the
right. The safe enters into 'working mode'.
4. Close the door of the safe to complete �nger vein registration.