Personal Protective Equipment - Bosch rexroth M1-16 Series Instruction Manual

14/54 Control blocks for mobile applications | Safety instructions
Bosch Rexroth AG, RE 64025-B/2021-08-12
Contact with hydraulic fluid!
Danger to health / damage to health, e.g. eye injury, skin damage, toxication
in the event of inhalation!
▶ Avoid any contact with hydraulic fluids.
▶ When handling hydraulic fluids, the safety instructions of the lubricant
manufacturer need to be observed at all times.
▶ Use your personal protective equipment (e.g. safety goggles, safety gloves,
suitable working clothes, safety shoes).
▶ Immediately seek medical attention, however, if hydraulic fluid gets into your
eyes or blood circuit or if you swallow it accidentally.
Escaping hydraulic fluid through leaking machine/system components!
Risk of burning and risk of injury due to escaping hydraulic fluid jet!
▶ Depressurize the relevant machine/system component and repair the leak.
▶ Never attempt to block or seal the leak or hydraulic fluid jet with a cloth.
Danger from improper handling!
Slip hazard! When using the control block as climbing aid, there is a danger
of slipping on wet and/or fluid-afflicted surfaces.
▶ Never use the control block as handle or step.
▶ Check how to safely get on top of the machine/system.
2�7 Personal protective equipment
The personal protective equipment is the responsibility of the user of the control
block. Observe the safety regulations in your country.
All pieces of personal protective equipment should be intact.
CAUTION