SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
areas for communal use in blocks of flats or in launderettes. – Do not exceed the maximum load of 8 kg (refer to the • "Programme chart" chapter). The operating water pressure at the water entry point from the • outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa).
ELECTRICAL CONNECTION WARNING! Risk of fire and electric WARNING! Risk of injury, electric shock. shock, fire, burns or damage to the appliance. • The appliance must be earthed. • Follow the safety instructions on the detergent • Always use a correctly installed shockproof packaging.
PRODUCT DESCRIPTION APPLIANCE OVERVIEW Worktop Rating plate Detergent dispenser Drain pump filter Control panel Feet for levelling the appliance Door handle CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door.
When a programme is set, all the : Eco Info indicator indicators of the phases related to spin area: the programme come on. • : spin speed indicator When the programme starts, only the indicator of the phase in • : no spin indicator operation flashes.
Page 8
Maximum load Programme Programme description Reference Temperature range (Type of load and soil level) spin speed 3 kg A very short cycle for cotton and synthetic items with Quick 20 Min 1200 rpm light soil level or worn only once. (quick 20 min) 40°C - 30°C 1 kg...
CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant standards. Different cau- ses can change the data: the quantity and type of laundry and ambient temperature. Wa- ter pressure, the supply voltage and the temperature of inlet water may also affect the washing programme duration.
The related phase indicator on the control panel To drain the water refer to ‘At the end comes on. of the programme’. EASY IRON PREWASH The appliance carefully washes and spins the laundry to prevent the creases. With this option you can add a prewash phase to a washing programme.
LOADING THE LAUNDRY Compartment for powder or liquid detergent Open the water tap. Connect the mains plug to the used for main wash. If using liquid detergent, mains socket. pour it just before starting the programme. Compartment for liquid additives (fabric con- 1.
SETTING A PROGRAMME • The appliance starts the countdown. • When the countdown is completed, the 1. Turn the programme knob to switch the programme starts automatically. appliance on and set the programme: • The indicator of the button flashes. You can cancel or change the set of •...
• Keep the door ajar, to prevent the mildew and 2. Wait until the door lock indicator goes off. odours. 3. Open the door. The washing programme is completed, but 4. Close the door. there is water in the drum: 5.
STUBBORN STAINS • If your appliance does not have the detergent dispenser with the flap device, add the liquid For some stains, water and detergent is not detergents with a dosing ball (supplied by the sufficient. detergent's manufacturer). We recommend that you pre-treat these stains before you put the items in the appliance.
To clean the detergent drawer it is necessary to • the appliance makes an unusual noise during remove it from its site. draining phase due to objects such as safety pins, coins and so on blocking the pump; Open the drawer. •...
EMERGENCY DRAIN Replace the filter into the pump by inserting it cor- Because of a malfunction, the appliance cannot rectly into the special drain the water. guides. If this occurs, do steps (1) through (8) of 'Cleaning Screw firmly the filter. the drain filter'.
TROUBLESHOOTING • - The appliance does not drain the water. WARNING! Refer to Safety chapters. • - The appliance door is open or not closed correctly. Please check the door! INTRODUCTION • - The mains supply is unstable. Wait until the mains supply is stable.
Problem Possible solution The spin phase does not • Set the spin option. operate or the washing cy- • Set the drain option if you set an option which ends with water in cle lasts longer than usual- the drum. •...
Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0,8 MPa) Cold water Water supply Maximum Load...