LG 27ART10AKPL Quick Start Manual

27ART10AKPL
Disassembly
1
Position the screen vertically.
4
Position the screen horizontally and
disassemble the cable holder screw.
M4L10
1X
7
Press the plug lock, push it in the direction of the arrow,
and then disassemble the screen completely.
※ Do not lift the plug or pull it downward
*MFL717564982209REV00*
Printed in Korea
2
Push the top of the screen lightly in the
direction of the arrow to disassemble
a part of the cover space.
5
Lower the rear lever and push the bottom
of the screen forward, as shown in the figure.
Plug lock
when disassembling the screen.
※ Caution
Avoid pushing it hard.
There is a risk of damage.
8
Lay the stand on the box packaging, remove the four screws,
and then disassemble the stand bar.
4X
3
Use a wedge or pull it with your hand
to completely disassemble the cover.
6
Lift the screen, separate the top
of the screen, and hold the screen.
Keep the disassembled screen close to the
stand at a distance of 10 cm (4 inches) or
less.
www.lg.com