Bosch AXT 22 D Original Instructions Manual page 12

12 | English
Never pick up or carry the machine while the motor is run-
u
ning.
Switch off, allow the cutter to stop and remove the plug
u
from the mains supply whenever you leave the work area.
Do not tilt the machine while it is running.
u
Do not expose the machine to rain. Only store the ma-
u
chine in a dry place.
When using an aggregator then it needs to be an Auto-
u
matic Voltage Regulation (AVR) version avoiding damages
caused by overvoltage spikes.
Maintenance and Storage
When the machine is stopped for servicing, inspection, or
u
storage, or to change an accessory, switch off and re-
move the plug from the mains supply and allow the ma-
chine to cool. Make sure that all moving parts have come
to a complete stop before making any inspections, adjust-
ments, etc.
Maintain the machine with care and keep it clean.
u
Examine the machine and replace worn or damaged parts
u
for safety.
Ensure replacement parts fitted are Bosch-approved.
u
If an extension cord is used it shall not be of lighter grade
u
than the supply cord already fitted to the machine.
Check the supply cord and any extension cord regularly
u
for damage or signs of ageing. Do not use the machine, if
the cords are damaged.
When servicing the cutter be aware that, even though the
u
motor will not start due to the interlock feature of the
guard, the cutter can still be moved if the motor is turned
by hand.
Never attempt to override the interlock feature of the
u
hopper.
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Movement direction
Reaction direction
Switching on
Switching off
Accessories/Spare Parts
F 016 L94 417 | (28.10.2022)
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the safety warnings and
instructions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the end of this operating
manual.
Intended Use
The product is intended for cutting of fibrous and woody
garden waste for composting.
The collection box is intended for collecting the material cut,
and for storing the chute assembly and prodder.
The collection box should not be used for other purposes.
Delivery Scope (see figure D)
Carefully remove the machine from its packaging and check
if the following parts are complete:
– Shredder
– Chute assembly
– Prodder
– Collection box
– Operating instructions
– Mains plug**
When parts are missing or damaged, please contact your
dealer.
When fully assembled the garden product weighs approxim-
ately 30,5 – 31,3 kg. If necessary, obtain assistance to re-
move from packaging.
**country specific
Product Features (see figures A−L)
The numbering of the product features refers to the illustra-
tion of the product on the graphics pages.
(1) Undercarriage
a)
(2) Mains plug
(3) Ventilation slots
(4) Green button
(5) Red STOP button
(6) Reverse button
(7) Prodder
(8) Chute assembly
(9) Clamping knob
(10) Adjustment knob
(11) Collection box
(12) Blade cover plate
(13) LED indicator (AXT 23 TC/25 TC/2550 TC only)
(14) Pressure plate
(15) Cutting system
Bosch Power Tools