WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. IMPORTANT PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING • Failure to follow those warnings may result in death, serious injury or damage to the product or other property. CAUTION •...
Page 4
• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord. - You may be electrocuted due to excess moisture. •...
Do not add accessories that have not been designed for this display. • If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG Customer Service. - If you continue to use without taking proper measures, electrical shock or fire can occur.
• For displays with glossy bezels the user should consider the placement of the display as the bezel may cause unwanted reflections from surrounding light and bright surfaces. • Install the product firmly fixed on a floor, wall, etc. to prepare against external impact such as wind and earthquake. - You must refer to the installation guide.
• Do not attempt to disassemble, repair or modify the product yourself. - Fire or electric shock can occur. - Contact LG Customer Service for repair. • Keep the product away from water. - Fire or electric shock accident can occur.
Product Disposal (Only, Hg lamp used LCD Monitor) • The fluorescent lamp used in this product contains a small amount of mercury. • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority.
ASSEMBLING AND PREPARING CAUTION • Always use genuine components to ensure safety and durability of the product. • The product warranty will not cover damage or injury caused by the use of unauthorised components. NOTE • The accessories provided with your product may vary depending on the model. •...
Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The images in this user manual may differ from the actual product and optional accessories. System Controller Power Supply Unit LCLG003*, LCLG005* LPLG001...
• You can connect one LED Display Module per LLLG003* terminal. • You can connect up to nine LED Display Modules per LLLG003*. - You can use the terminals. • You can connect up to three LED Controllers by connecting the daisy chain to the LCLG003* 1 terminal.
When connecting to LLLG003 (LAP020EL6B, LAP020EL6BP) / LLLG003-A (LAP020EL7B, LAP020EL7BP, LAP020EL7N, LAP020EL7NP) • You can connect up to two LED Display Modules per LLLG003* terminal by connecting the daisy chain. • You can connect up to 12 LED Display Modules per LLLG003*.
When connecting to LLLG003 (LAP025EL4D, LAP025EL4DP) / LLLG003-B (LAP025EL7B, LAP025EL7BP, LAP025EL7N, LAP025EL7NP) • You can connect up to three LED Display Modules per LLLG003* terminal by connecting the daisy chain. • You can connect up to 24 LED Display Modules per LLLG003*.
Specific Position to Connect Signal Cable CAUTION • When connecting the cable, rotate it more than five times to complete the connection. • Check the direction so that the Signal cable is not damaged. • Inserting the Signal cable with excessive force may damage the contact part.
TROUBLESHOOTING No image is displayed. Problem Solution Is the power cable connected to the • Check if the power cable is properly connected to the connector. product? Is the signal cable connected to the • Check if the signal cable is properly connected to the connector. product? Is the Ethernet cable connected to •...
Page 23
Check if the maximum number of connections has been exceeded. connected to each terminal? • When connecting to LLLG003 (LAP015EL6B, LAP015EL6BP) / LLLG003-A (LAP015EL7B, LAP015EL7BP, LAP015EL7N, LAP015EL7NP): Up to 1 • When connecting to LLLG003 (LAP020EL6B, LAP020EL6BP) / LLLG003-A (LAP020EL7B, LAP020EL7BP, LAP020EL7N, LAP020EL7NP): Up to 2 •...
PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. symbol means alternating current, and the symbol means direct current. Input/Output Ports Rated Voltage 48 V Power Power Consumption On Mode: 10 W (Max)
Page 26
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. The model and serial number of the product are located Address 111 Sylvan Avenue, North Building, on the back and on one side of the product. Record them Englewood Cliffs, NJ 07632 below in case you ever need service.