Table of Contents
Advertisement
UL and cUL Installation
•
The supplier neither guarantees that the operator panel is suitable for your
particular application, nor assumes responsibility for your product design,
installation or operation.
•
It is recommended to turn on and shut down the operator panel at least once
before installing any components/cards or before connecting the operator panel
to external devices, like for example serial devices.
Disposal Requirements Under WEEE Regulations
For professional users in the European Union: If you wish to discard electrical
and electronic equipment (EEE), please contact your dealer or supplier for further
information.
For disposal in countries outside of the European Union: If you wish to discard
this product please contact your local authorities or dealer and ask for the correct
method of disposal.
UL and cUL Installation
•
This equipment is suitable for use in Class 2 non-hazardous locations only.
[Combinations of equipment in your system are subject to investigation by the
local authority having jurisdiction at the time of installation].
•
All devices have to be supplied by a Class 2 power supply.
Do not separate when energized.
AVERTISSEMENT, NE PAS SEPARER SOUS TENSION.
Only UL and cUL approved expansion units are allowed to be connected to the
port designated "EXPANSION". At the moment there are no such units evaluated
or allowed.
SEULES LES UNITÉS D'EXTENSION CERTIFIÉES UL ET
cUL PEUVENT ÊTRE RACCORDÉES AU PORT DÉSIGNÉ « EXPANSION ».
À L'HEURE ACTUELLE, AUCUNE UNITÉ DE CE TYPE N'A ÉTÉ TESTÉE
OU AUTORISÉE.
12
Section 2 Safety Precautions
3BSE069463-600 Rev D
Advertisement
Table of Contents
