Date & Time - Honeywell WEB-HMI Series User Manual

To download the log files:
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Note: The files are downloaded in a compressed format and will require a decompression
tool (e.g. 7-Zip) in order to view the files.
To view the log files:
Step 1.
Step 2.
Step 3.
Date & Time
Provides access to the HMI panel date and time and to setup NTP operation if
required. Currently, HMI panel only makes use of date and time settings to provide
an accurate timestamp to entries in the log files.
Parameter
Current Timezone
Current Date
Local Time
Automatic Update
(NTP)
Accept NTP requests
WEBs HMI Touchscreen Monitor - User Guide
Access the System Settings screen. Then, select Logs.
Select Save. The file system screen is displayed.
Insert a USB memory stick into one of the USB ports of the HMI panel.
Select the USB device (e.g. usbmemory).
Select Save. This will save a file called 'logs.tar.gz' to the USB device.
Access the USB device on a PC and navigate to the 'logs.tar.gz' file.
Using a suitable tool (e.g. 7-Zip) open the file to reveal a file called
logs.tar.
Open the 'logs.tar' file to view its contents.
Description
Choose the required country/timezone from the displayed
options.
Set the onboard date
Sets the onboard clock (24-hour)
When enabled, use to specify the address of an NTP server.
When enabled the date and time will be synchronised to the
remote NTP server.
9