Sony Airpeak S1 Startup Manual page 43

3
Remove the propellers (CW).
Press the propeller hub against the metal part of the motor and turn the propeller clockwise to
remove it.
Propeller (CW)
4
Remove the propellers (CCW).
Press the propeller hub against the metal part of the motor and turn the propeller counterclockwise
to remove it.
Notes
• Be careful not to touch the motor and its surrounding parts as they become hot after use. There is a risk of burns.
• Remove the propellers carefully to avoid injury from the edges.
• If the metal part does not move smoothly when you press the propeller against it for removal, the propeller may fall off during flight
and pose a risk of crash. Refrain from using the aircraft and contact Sony Customer Support.
• Before attaching the propellers, make sure that the stickers on the motors are not damaged. If the stickers on the motors are peeled
off or the adhesive layers of the stickers are exposed, the propellers may not have been attached properly and pose a risk of crash.
Refrain from using the aircraft and contact Sony Customer Support.
Propeller (CW)
Propeller (CCW)
Propeller
(CCW)

Turn the
propeller while
pressing it
against the
metal part.
Hold the motor firmly in place with your
other hand to prevent it from turning.

Remove the
propeller (CW).

Turn the
propeller
while pressing
it against the
metal part.
Hold the motor firmly in place with your
other hand to prevent it from turning.

Remove the
propeller (CCW).
43