Use With A Tiny-In-One Monitor - Lenovo ThinkStation P360 Tiny User Manual

1. Type Bluetooth in the Windows search box and then press Enter.
2. Turn on Bluetooth, if it is off.
3. Select a Bluetooth device, and then follow the on-screen instructions.

Use with a Tiny-In-One monitor

Note: When installing the computer to the TIO monitor, ensure that you use the ac power adapter that
comes with the computer.
Primary video display output switching
The computer works with its integrated graphics card by default when it is installed to the TIO monitor. You
can turn on or turn off the computer by pressing the power button on the TIO monitor. Any other devices
connected to TIO monitor function the same as they are connected to the computer.
To switch the primary video display output from the integrated graphics card to the discrete graphics card,
do the following:
1. Turn on or restart your computer.
2. Before Windows starts up, repeatedly press and release F1 or Fn+F1 (depending on the keyboard
settings) until the Setup Utility program opens. If a BIOS password has been set, enter the correct
password when prompted.
3. Locate the Select Active Video submenu and select PEG. Then press F10 to save changes and exit.
4. Connect the discrete-graphic-card connector on the computer with the DisplayPort or HDMI connector
of the TIO monitor using an applicable dongle.
5. Press the mode-switching button on the TIO monitor to change from the TIO mode to the DP mode or
HDMI mode.
When the computer works with the discrete graphics card, pressing the power button on the TIO monitor
only turns on or turns off the TIO monitor. Devices connected to the TIO monitor do not function the same as
they are connected to the computer.
8
P360 Tiny User Guide