Sealey AP6310 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these
‰
units.
Locate the units in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use the mobile workstation on level and solid ground, preferably concrete.
‰
Keep the units clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use these units for any purpose other than that for which they are designed.
8
DO NOT use the units outdoors.
8
DO NOT place the units in a damp or wet location or an area where there is condensation.
8
DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst
8
moving the mobile workstation.
DO NOT step on the drawers.
8
DO NOT overload the drawers, weight limit per drawer is 40kg.
8
2. INTRODUCTION
20mm thick wooden worktop. 10 Drawers with a 40kg capacity each. Each drawer features aluminium pull handles and non-slip liners. Six
large castor wheels (four fixed and two swivel) that include brakes. Supplied with a pegboard back panel that is ideal for hanging tools and
compatible with TTS range of hooks, plus 14 storage bins in two sizes. There is a cabinet for extra storage and a heavy-duty side handle for
comfort and control when manoeuvring. Supplied with locks and two keys for the cabinet and draws. Some simple assembly required.
3. SPECIFICATION
Overall Size Inc Handle (W x D x H): ................. 1690 x 490 x 1432mm
Worktop Size (W x D x H): ..................................... 1600 x 460 x 20mm
Small Drawer (x6): ................................................... 505 x 415 x 80mm
Medium Drawer (x4):.............................................. 505 x 415 x 143mm
Cabinet (W x D x H): .............................................. 538 x 480 x 650mm
Top Shelf (W x D x H): ........................................... 1600 x 200 x 43mm
4. ASSEMBLY
4.1. Remove outer packaging and dissemble the wooden transport. (fig.1).Fixings located in the draw.
fig.1
© Jack Sealey Limited
10 DRAWER MOBILE WORKSTATION WITH
BACKBOARD
AP6310
MODEL NO:
Original Language Version AP6310 Issue 1 28/06/21