GE AKD-8 Operation And Maintenance Manual page 5

will slide further through the breaker cubicle
door. Rotate the ¼ - turn latch rod counter
clockwise to lock the remote racking operator
to the breaker. Check the latch on the left side
of the remote racking operator to make sure it
is fully engaged into the breaker front cover
(indicated by the label on the latch).
8 – Breaker Mounting Clip
2 – Square Drive
Coupling To Breaker
7 – ¼ turn latch/rod to
mount to breaker
1 –Gear Motor
Housing
5 – IN/OUT
Directional
Toggle Switch
AKR 30/50 Remote Racking Assembly
Remote Racking Operator for AKR Breakers
Removing the Remote Racking Operator from
the Small Frame AKR Circuit Breaker.
Hold the remote racking operator securely and
rotate the latch release (located on the left side
of the remote racking operator) clockwise. This
should allow the remote racking operator to be
pulled from the breaker front cover.
racking screw
automatically.
Figure 2
5
access covers will
6- Circuit Breaker
Reset Toggle Switch
AC Plug
30-foot cable
3 – Start Switch
Push Button
4 – Hand-Held
Control Box
The
close