Table of Contents
Advertisement
• Confirm by pressing the "YES" key for 3 seconds if you have
emptied the drawer, and the "NO" key if you have not
emptied it.
IMPORTANT
If you make a mistake when confirming, it is
preferable to remove the drawer again, and empty
it if necessary. Then replace the drawer and confirm
by "YES" for 3 seconds.
H.3
Screen (display)
6
2
1
7
9
1. Scrolls the product keyboards.
2. Hot water icons: Serve to trigger output of hot water, small
volume: small Icon / Large volume: large Icon.
3. Selection icons: To launch the desired product. The colour
bar under each of the icons indicates the mill that will be
used during the cycle.
• PURPLE: left mill
• ORANGE: central mill
• GREEN: right mill
4. To access favourite products directly. (Page 1).
5. To access the list of main functions.
6. Icon to access the error codes / alarms activated.
7. Icon to indicate the remaining time of the compulsory
cleaning of the machine (before blocking).
8. Steam icon: Initiate the production of steam, Small
quantity: Small Icon / Large quantity: Large Icon.
9. Allows to make coffee with ground coffee introduced
manually by the trap (for 10 seconds).
H.4
Screen during an infusion
I
DAILY CLEANING
I.1
Intro
IMPORTANT
On a fully automatic coffee machine, it is very
important to perform the cleaning sequences
described below at least once a day to ensure a
good level of hygiene, quality of service and
reliability of your machine.
16
3
5
4
1
2
1. "STOP function":
The Stop icon stops a cycle in progress instantly, regard-
less of what it is. If the "cycle repetition" function is
enabled, press twice to stop.
2. "Cycle repetition function":
-
The
and
the cycle, serve to pre-set the number of cycles that will
run consecutively continuously.
• Pressing the
the expected number is displayed between the
-
.
• To decrease the number displayed, press the
as many times as necessary to reach the desired value.
• The cycles start automatically after selection, and run
until the number chosen is reached.
H.5
Screen : Quick access / code
8
1
1. "Info": Click on this icon to access the page containing a
summary of the information relating to the whole of the
machine in real time.
Direct controls for a Level 0 user
2.
"Cleaning" icon: to access all available operations of
cleaning and flushing.
3.
"Stand-By" icon: puts the machine in standby.
4.
"On-Off" icon: stops or starts the machine if the main
switch is in position 1.
5.
"Star" icon: To access favourite products directly. (Page
1).
6.
"Password" To access the main menu, it is necessary to
enter a Level 1 or Level 2 code. If the USB dongle is
inserted: click on "OK" without entering a code.
buttons that appear on the screen during
icon as many times as necessary until
2
3
4
5
6
and
-
icon
Advertisement
Table of Contents
