Advertisement
Replacing the Lamp unit ( continued)
J
J Replacement procedure
J
1) Turn off the Power and then remove the AC power plug from the wall outlet.
Wait at least one hour and make sure the lamp unit and surroundings are cool.
2) Use a Phillips screwdriver to loosen the Lamp cover fixing screw (one screw)
and remove the lamp cover.
Remove the lamp cover by pulling it slowly toward the direction of the arrow.
z
3) Use a Phillips screwdriver to loosen the lamp unit fixing screws (three screws)
until the screws turn freely.
4) Hold the used lamp unit by its handles, and pull it gently from the projector.
5) Insert the unused lamp unit in correct direction. Tighten the lamp unit fixing
screws (three screws) securely with a Phillips screwdriver.
6) Attach the lamp cover. Tighten the lamp cover fixing screw (one screw) se-
curely with a Phillips screwdriver.
Attach the lamp cover by pushing it slowly opposite the direction of the arrow.
z
8 -
ENGLISH
Handles
Lamp cover
Lamp cover fixing screw
Lamp unit fixing screws
Advertisement
