Flash The Application To Your Device And Get Connected - Bosch XDK110 Connection Manual

Connect XDK110 device to your Azure IoT services

4.7 Flash the application to your device and get connected

4.7.1. Flash the AzurePlugAndPlay application.
the AzurePlugAndPlay application already.
4.7.1.1. Open the XDK Workbench
4.7.1.2. Connect your XDK110 device to the Workbench through USB or JLink.
4.7.1.3. Import the 'AzurePlugAndPlay' application from the XDK-Examples
4.7.1.4. Build the project and flash the device
The application is expected to run, soon after flashing your device.
4.7.2. When connected through USB you can listen to the console logs to get the real time execution details of your device.
4.7.3. Explore the Views of your device
4.7.3.1. Go to 'Devices' page within IoT Central application
4.7.3.2. Once the console says 'Plug and Play enabled, running...' you will be able able to see that the device in the
'All devices' list as well as in the 'XDK110' list.
4.7.3.3. Select your device (in this example
Data subject not change without notice | Printed in Germany | December 2020
Please keep in mind that this step is only needed if your XDK doesn't carry
) from the list and explore different views
myXdk110
10 | 16
BCDS