Using The Remote Controller - Mitsubishi Electric CAHV-R450YA-HPB Installation & Operation Manual

[3] Using the Remote Controller

<1> Power ON/OFF
During operation
During stoppage
<2> Operation mode and set temperature settings
Operation mode setting
Button operation
Unit1
F1 F2
Set temperature setting
Button operation
Unit1
F1 F2
Unit1
FRI
Press the [ON/OFF] button.
Unit1
The ON/OFF lamp will light up in green, and the operation will start.
Unit1
FRI
Pressing the [ON/OFF] button brings up a confirmation screen. When it appears,
press the [F3] button.
The ON/OFF lamp will come off, and the operation will stop.
Press the [F1] button to go through the operation modes in the order of "Heating,
Anti-Freeze, Hot water, and Heating-ECO."
FRI
Select the desired operation mode.
F3 F4
Press the [F2] button to decrease the set temperature, and press the [F3] button
FRI
to increase.
F3 F4
Anti-Freeze
Heating
Hot water Heating-ECO
59