Power Cords - Lenovo ThinkSystem SR665 V3 System Configuration Manual

Table 17. Parts list (continued)
Description
Index
CMOS battery
23
M.2 drive backplane
24
M.2 drive
25
M.2 retainer clip
26
Standard air baffle filler
27
Standard air baffle
28
Memory module
29
2U standard heat sink
30
T-shape performance heat sink
31
Processor
32
Processor filler
33
Processor board
34
System I/O board
35
Firmware and RoT security
36
module
PCIe adapter
37
Riser 3 cage (2FH)
38
Riser 1 or riser 2 cage (3FH)
39
Riser 3 card (2FH)
40
Riser 1 or riser 2 card (3FH)
41

Power cords

Several power cords are available, depending on the country and region where the server is installed.
To view the power cords that are available for the server:
1. Go to:
http://dcsc.lenovo.com/#/
2. Click Preconfigured Model or Configure to order.
3. Enter the machine type and model for your server to display the configurator page.
4. Click Power ➙ Power Cables to see all line cords.
Notes:
• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
• Power cords for this product that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
Tier 1 CRU Tier 2 CRU
√
√
√
√
√
√
√
√
√
√
Consumable
and structural
FRU
parts
√
√
√
√
√
√
√
√
√
.
Chapter 3 Parts list
47