GE VersaMax GFK-2721A Manual page 41

The following table lists the configuration parameters that must match jumper settings:
Catalog #
IC200ALG230 Analog Input Module, 12 Bit Voltage/Current 4
Channels
IC200ALG260 Analog Input Module, 12 Bit Voltage/Current 8
Channels
IC200ALG262 Analog Input Module, 15 Bit Current Differential 8
Channels
IC200ALG264 Analog Input Module, 15 Bit Current 15 Channels
IC200ALG266 Analog Input 15 Bit Current 15Ch with enhanced
over voltage protection
IC200ALG320 Analog Output Module, 12 Bit Current, 4
Channels
Analog Output Module, 12 Bit Voltage 4
IC200ALG321
Channels. 0 to +10VDC Range
IC200ALG322 Analog Output Module, 12 Bit Voltage 4
Channels. -10 to +10VDC Range
IC200ALG325 Analog Output Module, 13 Bit Voltage 8
Channels
IC200ALG326 Analog Output Module, 13 Bit Current 8
Channels
IC200ALG327 Analog Output Module, 13 Bit Voltage 12
Channels
IC200ALG328 Analog Output Module, 13 Bit Current 12
Channels
Analog Mixed Module, Input Current 4 Channels,
IC200ALG430
Output Current 2 Channels
Analog Mixed Module, 0 to +10VDC Input 4
IC200ALG431
Channels, Output 0 to +10VDC 2 Channels
IC200ALG432 Analog Mixed Module, 12 Bit -10 to +10VDC,
Input 4 Channels / Output -10 to +10VDC 2
Channels
GFK-2721A
Description
Chapter 3 Configuration
Parameter
0 to 10 VDC input voltage
4mA to 20mA input current
-10Vdc to +10Vdc input voltage
Same as IC200ALG230
0mA to 20mA input current
4 to 20mA input current
0mA to 20mA input current
4 to 20mA input current
Same as IC200ALG264
Outputs default to 4mA
Outputs default to hold last state
Outputs default to 0V
Outputs default to hold last state
Same as IC200ALG321
0Vdc to 10Vdc,
outputs default to 0Vdc
0Vdc to 10vdc
outputs default to hold last state
-10Vdc to +10Vdc
outputs default to 0Vdc
-10Vdc to +10Vdc
outputs default to hold last state
0mA to 20mA
outputs default to 0mA
0mA to 20mA
outputs default to hold last state
4mA to 20mA
outputs default to 4mA
4mA to 20mA
outputs default to hold last state
Same as IC200ALG325
Same as IC200ALG326
Same as IC200ALG320
Same as IC200ALG321
Same as IC200ALG321
3
Jumper
Setting
A15 - A16
A13 - A14
no jumper
A17 - A18
no jumper
A16 - A17
no jumper
B13 - B14
no jumper
B13 - B14
no jumper
B1 - B2,
and B2 - B3
B1 - B2
B2 - B3
no jumper
B1 - B2,
and B2 - B3
B1 - B2
B2 - B3
no jumper
3-9