Picture Grid; Figure 129 Picture Grid Interface - Honeywell 35 Series User Manual

Note:
•
•
•
•

Picture Grid

Picture grid refers to evenly dividing the video of a channel by time range
and searching for a video based on thumbnails divided by time range.
1. Go to Main Menu > Playback > Picture Grid.
The Picture Grid interface is displayed.

Figure 129 Picture Grid Interface

2. Select a camera in the camera list on the left side of the picture grid
screen. Videos shot by the camera in the earliest time range on the
current day are displayed as thumbnails in the window on the right
side.
3. Select a day from calendar.
4. A day are dividend to 12 grids, two hours is one grid. double-click the
image to dividend to 12 grids again. The minimum grid interval is
one minute. Right – click to enlarge grid interval
5. Select a required thumbnail, click
100
The video recording will lose an hour while DST start, because the
DST working.
The NVR time had to back to last hour while the DST STOP
working, so there will be twice video recording at DST end time.
When you play DST END TIME video recording, the NVR will always
play first video recording, you can't choose the second video
recording to play. If you want to play second video recording, you
need to wait the first video recording play over and then the NVR
will continue play second video recording.
If you want to download DST END TIME video recording, you need
to choose the period of video recording more than the DST END
TIME, then the DST END TIME video recording (the twice videos)
will download.
Honeywell 35 Series Network Video Recorder User Guide
to play the video.