Chapter 2
2.5 Installing the Card Reader
2.5.1 Notice At Installation
Installation of this equipment needs 'Card Reader Attachment Kit-F1'.
2.5.2 Checking the Contents
< Card Reader-E1 >
[1]
[1]
Card Reader
[2]*
Screw (TP; M3X12)
[3]*
Toothed washer
[4]*
IP-card reader cable
* Not used for this equipment.
< Card Reader Attachment Kit-F1 >
[1]
[1]
Card reader cable
[2]
Screw (TP; M4X8)
2.5.3 Turning OFF the Power of the Host Machine
1) Turn OFF the main power.
2) Remove the power plug (for outlet).
2.5.4 Installation Procedure
1) Remove the face seal [1] at the right side of the host machine. (The re-
moved face seal is not used.)
2-8
[2]
[3]
[4]
F-2-18
1pc
1pc
1pc
1pc
[2]
F-2-19
1pc
1pc
0019-8625
0019-8626
2) Install the card reader [1].
- 2 embosses [2]
- 1 screw (TP; M4X8) [3]
[2]
3) Remove the panel mount cover [1].
- 1 screw [2]
0019-8704
0019-8629
4) Install the 2 connectors [1] of the card reader cable.
[1]
F-2-20
[1]
[3]
F-2-21
[1]
F-2-22
[2]