Related Manuals for Beko WTV87112BC1
Summary of Contents for Beko WTV87112BC1
- Page 1 Washing Machine User Manual WTV87112BC1 Document Number: 2820529612_EN/ 15-08-22.(11:45)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Supplier name or trademark Beko WTV87112BC1 Model name 7149345300 Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply INFORMATION • It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION! •... -
Page 8: Electrical Connection
1 Loosen the lock nuts on the feet by hand. INFORMATION 2 Adjust the feet until the product stands in a stable and balanced way. • Use an anti-limescale suitable for the washing machines. 3. Tighten all lock nuts by hand again. •... -
Page 9: Loading The Laundry
4.2.5 Correct load capacity • Wash trousers and delicate laundry turned inside out. The maximum load capacity depends on the type of laundry, the degree of soiling and the • Keep laundry items made of Angora wool in desired washing programme. a plastic bag in the freezer for a few hours before washing. - Page 10 Using softeners • Do not select a programme with prewash if you are using a detergent bag or dispensing Pour the softener into the softener ball. Place the detergent bag or the dispensing compartment of the detergent drawer. ball directly among the laundry in the product. •...
- Page 11 If the product does not contain a liquid Using bleaches detergent cup: • Select a programme with prewash and add the • Do not use liquid detergent for the prewash bleach at the beginning of the prewash. Do not in a programme with prewash. put detergent in the prewash compartment.
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes • Hygiene+ Depending on the type of fabric, use the Use this programme for laundry that requires following main programmes. an intense, long, anti-allergic and hygienic washing cycle at high temperature. A high • Katoen (Cottons) level of hygiene is ensured thanks to the long You can wash your durable cotton laundry heating and additional rinsing step. -
Page 16: Special Programmes
Mix 40 Below you will find the stain groups based on • the quick function. You can use this programme to wash cottons and synthetics together without the need to sort them. When the quick function is selected: Blood Fruit juice Chocolate Ketchup Hemden (Shirts) - Page 17 If you only want to drain the water without INFORMATION spinning the laundry, select the “Spin+Pump programme, and use the Spin Speed • If the programme has not reached the spin Adjustment button to select the No Spin step, you can change the spin speed without function.
-
Page 18: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
• Extra Spoelen (Extra Rinse) INFORMATION This function enables the machine to carry out another rinsing cycle in addition to the • If the Programme Selection knob is turned one carried out after the main wash. Thus, the when the Child Lock is enabled, "Con" risk for sensitive skins (babies, allergic skins, appears on the display. - Page 19 Cancelling the delayed end function programme follow-up light will remain on even if you end the function by pressing any button. If you end If you want to cancel the delayed end time the function by turning the programme selection countdown and start the programme immediately: knob, the programme follow-up light will remain on 1.
-
Page 20: Loading Door Lock
4.3.14 Loading door lock • Remove the loading door emergency There is a locking system on the loading door of handle behind the filter cover with a tool. the machine that prevents opening of the loading • Open the loading door by pulling the loading door in cases when the water level is unsuitable. -
Page 21: Maintenance And Cleaning
4.4 Maintenance and cleaning 4.3.16 Cancelling the programme To cancel the programme, turn the Programme Service life of product extends and frequently Selection knob to select another programme. experienced problems will be reduced if it is Previous programme will be cancelled. End/ cleaned at regular intervals. -
Page 22: Cleaning The Body And Control Panel
4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause rust solid items such as buttons, coins and fabric stains in the drum. Clean the stains on the fibres clogging the pump impeller during drum surface by using cleaning agents for discharge of washing water. -
Page 23: Troubleshooting
5 Troubleshooting 3 Follow the below procedures in order to drain water. Programmes do not start after the loading door is The product has an emergency water draining closed. hose, in order to drain the water: • Start / Pause / Cancel button is not pressed. >>>Press Start / Pause / Cancel button. - Page 24 Loading door cannot be opened. Washing performance is poor: Laundry turns gray. (**) • Loading door lock is activated because of the water level in • Insufficient amount of detergent has been used over a long the product. >>>Drain the water by running the Pump or period of time.
- Page 25 Washing machine does not rinse well. Too much foam forms inside the product. (**) • The amount, brand and storage conditions of the detergent • Improper detergents for the washing machine is used. used are inappropriate. >>>Use a detergent appropriate >>>Use detergents appropriate for the washing machine.
- Page 26 Beko, and will void the warranty of the product. Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs falling outside the mentioned list of spare parts, contacting in such cases authorized professional repairers or registered professional repairers.