Product overview
3.3 Hardware properties
View of the module
The figure below shows the CPU 1518T‑4 PN/DP.
Figure 3-1 CPU 1518T‑4 PN/DP
NOTE
Protective film
Note that a protective film is applied to the display in the delivery state of the CPU. Remove
the protective film if necessary.
Properties
CPU 1518T‑4 PN/DP has the following technical properties:
Property
CPU display
Supply voltage
PROFINET IO
20
Description
All CPUs of the SIMATIC S7-1500 product series feature a
display with plain text information. The display provides
information on order numbers, firmware version and
serial numbers of all connected modules. In addition, you
can set the IP address of the CPU and carry out further
network settings. The display shows occurring error mes
sages directly in plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC
S7-1500 Display Simulator are shown on the display.
The 24 V DC supply voltage is fed via a 4-pin plug located
on the front of the CPU.
Additional information
•
S7-1500, ET 200MP system manu
al (https://www.profibus.com)
•
SIMATIC S7-1500 Display Simulat
or
(https://support.industry.siemens.
com/cs/ww/en/view/109761758)
•
Section Connecting (Page 30)
•
S7-1500, ET 200MP system manu
al (https://www.profibus.com)
CPU 1518T-4 PN/DP (6ES7518-4TP00-0AB0)
Equipment Manual, 11/2022, A5E50479758-AB