Siemens SIMATIC S7-1500 Equipment Manual page 10

The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Output (MSO)
Configurable submodules/submodules for
shared device
Switching cycle counter
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following components are supplied with the module and can also be ordered separately
as spare parts:
• Labeling strips
• U connector
• Universal front door
Other components
The following component can be ordered separately:
Front connectors, including potential jumpers and cable ties
For more information on accessories, refer to the S7-1500, ET 200MP system manual
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)
Equipment Manual, 12/2021, A5E34934069-AC
Firmware ver-
sion of the
as of V13 SP1 with
module
V1.0.0 or high-
er
V1.0.0 or high-
er
V1.0.0 or high-
er
V1.0.0 or high-
er
(PROFINET IO only)
V1.0.0 or high-
er
(PROFINET IO only)
V1.2.0 or high- V16, Update 4
er or higher with HSP 0343 or
V17 or higher with HSP
0343
(PROFINET IO only, central
operation with a S7-
1500 CPU is supported)
Configuration software
STEP 7
STEP 7 , V12 or higher
HSP 0119
STEP 7 V5.5 SP3 or higher
X
X
X
X
X
Product overview
2.1 Properties
GSD file in
--- / X
--- / X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
9