Bosch Active Line Owner's Manual page 30

Hide thumbs Also See for Active Line:

Table of Contents

English–30

Operation

Initial Operation

Connecting the Charger to Household Electricity

 Note the household voltage! The voltage of the power

supply must correspond to the specifications given on

the battery charger nameplate.

Plug the charger plug C3 of the power cord into the charger

socket C2 of the charger.

Connect the power supply cable (country-specific) to the

household electricity supply.

0 276 001 USAen | (17.6.15)

Charging the Removed Battery

C5 Charge connector

C6 Socket for charge connector

A2 Rack-type battery pack

A3 Operation and charge-control indicator

A4 Battery On/Off button

A8 Standard battery pack

Switch the battery pack off and remove it from the holder of

the eBike. To do this, read and follow the operating instruc-

tions for the battery pack.

 Put the battery pack down only on clean surfaces. In

particular, avoid getting the charge socket and the con-

tacts dirty, e.g., with sand or soil.

Insert the charger plug C5 for the battery charger into the

socket C6 on the battery pack.

Bosch eBike Systems

Table of Contents