Shocks / Springs; Shock Assembly View; Shock Replacement - Polaris RZR PRO R Service Manual

STEERING / SUSPENSION

SHOCKS / SPRINGS

SHOCK ASSEMBLY VIEW

q
Shock Mounting Fasteners
133 ft-lbs (180 Nm) - Torque bolt side
w
Spring Adjuster
e
Tender Spring
Retainer gap should be 180 degrees from spring end.
9.28
r
Spacer
t
Main Spring
y
Spring Retainer

SHOCK REPLACEMENT

1. Elevate the vehicle off the ground to relieve the
suspension load.
2. Support under A-arm or trailing arm.
3. If equipped, disconnect Dynamix electrical
connection and cut cable tie retaining harness to the
shock body.
4. Remove the upper and lower fasteners retaining the
shock and remove the shock from the vehicle.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.