GE IC754VSI12CTD Operator Interface Products page 86

4
To set SNTP
1. In the Control Panel, double-tap
The Date/Time Properties dialog box appears.
Note:
2. To add or modify SNTP settings, select the SNTP tab.
3. To enable SNTP, ensure the Enable SNTP check box is selected.
4. Enter the time server name in the Server(s) field.
5. Set the Refresh, Retry, and Threshold parameters.
6. Tap Update Now to update SNTP settings immediately.
7. Tap OK to finish.
8. To save the settings, run the Backup utility. (See page 2-10.)
12" QuickPanel* View Intermediate, Color and Monochrome – December 2010
4-44
Tap Apply after making changes in any box.
Date/Time.
GFK-2306E