Assembly And Adjustment - DeWalt DW089 User Manual

1 Clamp (DW089KD)
1 9 V battery (DW089KD)
1 Kitbox
1 Instruction manual
• Take the time to thoroughly read and understand this manual prior

ASSEMBLY AND ADJUSTMENT

Unpacking
FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser must be
formulated in the language of the user.
For that purpose, a separate sheet of self-adhesive labels has been
supplied with the tool.
The warnings should read as follows:
• If the warnings are in a foreign language, proceed as follows:
DW089_DW089CG - User Manual - NA - May 2018.indd 13
to operation.
WARNING! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
WARNING: Check that the safety warnings on the label
have been formulated in your language.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.
DW 0 8 9/ D W089CG
13
5/25/2018 10:40:47 AM
E