At The End Of A Program; Interrupting A Program - Miele G2832SCi Operating Instructions Manual

At the end of a program

At the end of a program the display
shows Program finished or Drying plus
with the door slightly open (if activated).
,
The steam being released at the
end of the program may be hot.
Use caution.
Dishes tend to chip if removed still hot
from the dishwasher. If the automatic
door opening setting is deactivated
(see "Settings - Drying plus") it is
recommended to open the door
manually to allow tableware to cool
much faster.
^ Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray from dropping
onto dishes in the lower basket.
^ Push the baskets in.
^ Turn the dishwasher off s.
The dishwasher continues to use
electricity until turned off with the s
button.
If the dishwasher is not used for a
longer period of time, e.g. vacationing,
turn off the water supply.
^ Lift the door and push until the catch
engages.
The door will then close automatically.
,
Do not put your hand inside of
the door as it is closing. Danger of
injury.

Interrupting a program

A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
,
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Use
37