Mitsubishi Electric WD-73740 Supplemental Owner's Manual page 20

20
2. TV Menus
Picture, continued
3 D
Picture Mode
Source
Format
Automatic •
Side-by-Side
Top/bottom
Checkerboard
2D+ Depth When active, generates a simulated 3D image from an ordinary 2D signal.
Glasses Standard,
Emitter Reverse, Off
Internal
Glasses Standard,
Emitter Reverse
External
Depth
DLP Link Standard,
Reverse, Off
The Mitsubishi TVs will support the mandatory HDMI
1.4a 3D signals intended for the United States. Spe-
cifically, the TVs will support the 3D signals known as
Frame Packing 1080p/24Hz and 720p/60Hz (primar-
ily from Blu-ray players and gaming consoles), Side-
by-Side in 1080i/60Hz, 1080p/24Hz/30Hz/60Hz and
720p/60Hz, Top/Bottom in 1080p/24Hz and 720p/60Hz,
and Checkerboard 1080p/60Hz. However, there may be
some 3D sources that are not compatible with the TVs.
For assistance call 1(800) 332-2119
Off • Overrides the 3D processing of any HDMI 1.4a-compliant 3D signal and dis-
plays the signal in 2D instead.
• Allows access to some of the 2D picture adjustments that are hidden when the
TV's 3D mode is set to Automatic.
When the TV receives a 3D signal from an HDMI 1.4a-compliant device, forces
the TV automatically into 3D mode and selects the correct 3D format.
• When the TV receives a normal 2D signal, makes the TV automatically exit 3D
mode.
• Not effective with checkerboard 3D signals. Manually select Checkerboard
when needed.
• 3D format choices for use with 3D signals that are not HDMI 1.4a compliant.
• When the TV receives a 3D signal that is not HDMI 1.4a compliant, you
must manually select a 3D format here based on the type of 3D signal being
received.
• Return the TV to Automatic or Off at the end of the non-compliant 3D
program.
• If an HDMI 1.4a compliant signal is received, the TV will automatically override
any manual 3D selection.
• For use with the TV's internal emitters
• Select the Off setting if you notice IR interfer-
ence with other devices.
For use with an external emitter connected to the
TV's 3D GLASSES EMITTER jack.
• Available only when Source Format is set to 2D+ Depth.
• Highlight the icon and press ENTER to display the adjustment screen.
• Allows adjustment of the 3D effect from a flatter image to one with more depth.
• For use with DLP Link.
• Select the Off setting if you are not using DLP
Link glasses.
Notice Concerning Format Compatibility
In all cases: (1) 3D sources must connect to the TVs
using the HDMI inputs or via StreamTV™ Internet Media;
and (2) Active Shutter 3D glasses that match the TV's
internal synchronization emitter, or Active Shutter 3D
glasses with their own external matching synchroniza-
tion emitter connected to the rear of the TV or DLP Link
Active Shutter 3D glasses are required in order to view
3D content.
Use the Standard or
Reverse setting to synchro-
nizes left/right images to
work with your 3D glasses.
Use the Standard or
Reverse setting to synchro-
nizes left/right images to
work with your 3D glasses.