Table of Contents
Advertisement
INSTALLATION AND CONNECTION
3. Select a DX-VS1UE to assign a new IP Address.
The selected DX-VS1UE is shown in the "Selected IP Address" field.
4. Enter Admin's password and press "Change IP Addr" button to change the IP address.
The default password is "admin". The password can be changed on the server configuration
page.
5. After entering the new IP Address you want, click the "OK" button.
To view image through DX-VS1UE, DX-VS1UE's IP address and PC's IP address should be at
same local Network.
6. If the IP address is changed normally, the new IP address will be listed.
And then select it, enter password, and press the "Start Configuration" button.
15
DX-VS1UE
DX-VS1UE Setup Guide
Advertisement
Table of Contents
