Installation Position - HP m550 User Manual

1.5.2 Installation position

No Item
Front
1
camera
2 Easy pad
3 GPS
4 Rear camera To be fixed on the car plate or rear handle.
5 Installation
Host and
6
wires
Installation position
To be fixed on scooter's head or the central of front case.
To be fixed on the front handle. (refer to above drawing)
DO NOT put the Microphone toward to front end.
To be fixed on a good reception of front handle..
Use Installation Kit to mount the host, accessories and wires.
Refer to above image and the wiring route to install all items.
Put and fix the host and accessories' wires in the cabinet. Use
Velcro to fix the host on the inner side of cabinet; it's convenient
to remove the host and take out memory card to check.
*When installation is completed, use Go Moto app to calibrate
topple-over detection. (Tilt Detection).
11